Testing Standard:
TAPPI T810 Bursting Strength of Corrugated and Solid Fiberboard ie. TAPPI T810 Burst Test of Corrugated
Standard Number
TAPPI T810
Standard Title
Bursting Strength of Corrugated and Solid Fiberboard, Test Method
Overview of TAPPI T810 Burst Test of Corrugated:
Rationale of TAPPI T810 Burst Test of Corrugated:
TAPPI T810 Burst Test of Corrugated. Can be used to evaluate the strength of corrugated and solid fiberboard materials that fall within the above parameters. Inexpensive and relatively easy to perform, this test method yields results that simulate the strength characteristics of some end use requirements. This is achieved by securing the material between annular clamps and applying increasing pressure through a rubber disk until failure occurs. The maximum pressure up to material rupture is recorded as the bursting strength.
Key Points:
- Correlates directly to the thickness of the material
- Correlates to some end use requirements
- Verifies strength of material according to the manufacturer’s certification specifications
- Consider TAPPI T403 for paper weighing less than 20 lbs/MSF
- Consider TAPPI T807 for paperboard and linerboard materials
Related Standards:
- ISO 2759 – Board – Determination of Bursting Strength
- TAPPI T403 – Bursting Strength of Paper
- TAPPI T807 – Bursting Strength of Linerboard
As always, Purple Diamond offers you the ability to either schedule an initial consultation, complimentary, OR you can book a facility tour and come on in and visit. Definitely feel free to stop in to the lab if you are close to the Lehigh Valley. The packaging and whole Purple Diamond team is here to assist you anyway that we can. The initial consultation can be either a phone call or a zoom call, whatever is more convenient for you. Reach out via the Contact Us page by either filling out the contact us form OR booking some time on the calendar below the contact form. Either way we will get back to you! Thank you so much for reading down this far and thank you for considering Purple Diamond as your dedicated testing, engineering, and design facility for all of your packaging needs.
Related Testing Standards
- ASTM D642
- ASTM D685
- ASTM D880
- ASTM D951
- ASTM D999
- ASTM D3078
- ASTM D3103
- ASTM D3285
- ASTM D4169
- ASTM D4332
- ASTM D4728
- ASTM D5265
- ASTM D5276
- ASTM D5277
- ASTM D5487
- ASTM D6055
- ASTM D6179
- ASTM D6344
- ASTM D6653
- ASTM D7386
- ASTM F88
- ASTM F1140
- ASTM F1886
- ASTM F1929
- ASTM F1980
- ASTM F2096
- ASTM F2250
- ASTM F3039